GreenFire® Product - Heat Barrier
GreenFire® Heat Barrier is a revolutionary, non-toxic fire safety solution for contractors, utilities, and automotive industries. Provides an insulated, fire-resistant foam blanket for soldering/welding protection with no clean up, while doubling as leak detection for pressurized piping. Features patented GreenFire® technology.
GreenFire® Heat Barrier
PRODUCT OVERVIEW
GreenFire® Heat Barrier is a Class A-B Wetting Agent that cools, prevents flare-ups where they can occur, and will adhere to any surface. For use in Hot Work Areas. Non-toxic, non-carcinogenic, and 100% PFAS free.
CLASSIFICATION
- Class A-B
DESIGNED FOR USE WITH:
- GreenFire® 20 oz. Aerosol Bottle
INDUSTRIES:
- Fire Sprinklers – For use when installing or maintaining copper automatic fire sprinkler systems
- Plumbing – Use when brazing or soldering. Use as detection to locate natural gas piping and fitting leaks
- Welding – Use to locate leaks in compressed air lines and natural gas piping and fittings
- HVAC – Use when brazing or soldering
- Automotive – Use to locate compressed air line leaks
- Roofing
- Hot Work Areas
UTILITY CONTRACTORS:
- Electric utility service territory hot work areas
- Natural gas hot work areas
- Data communications hot work areas
Product Cut Sheet: https://ecofiresuppression.com/gf-product-cut-sheets
Safety Data Sheet: https://ecofiresuppression.com/gf-safety-data-sheets
GreenFire® Price List: https://ecofiresuppression.com/gf-price-list
GreenFire® Heat Barrier - Product Specifications
CLASSIFICATION
GreenFire® Wetting Agent is Class A-B
JOB SITE APPLICATIONS
GreenFire® Heat Barrier Job Site Applications:
- New Construction
- Tenant Improvement
- Remodeling
- Handyman Work
PPE
No special protective equipment, precautions, hazards, or extinguishing media is needed when using GreenFire® Heat Barrier.
HAZARDS
GreenFire® Heat Barrier is:
- Non-flammable
- Non-combustible
- Non-explosive
- Intrinsically flame retardant
- Non-Carcinogenic
- Non-Toxic
ENVIRONMENTAL
GreenFire® Heat Barrier is:
- PFAS Free
- Zero Haz-Mat clean up required
- Does not contaminate waterways
- Non-Carcinogenic
- Non-Toxic
- Zero VOC
- NSF White Book Listed
- Food environment safe
- USDA Recognized
- Eco friendly
RECOMMENDED APPLICATION RATES
GreenFire® Heat Barrier is a pre-diluted product to be used as-is by the buyer.
This product is NOT to be diluted at 3% with inducting nozzles etc.
PHYSICAL PROPERTIES
GreenFire® Heat Barrier:
Proportioning Ratio: This product is not meant to be proportioned by the end user. It is already pre-proportioned.
Specific Gravity: 1.02g/cc
pH: 6.9
Viscosity: 10cP at 20°C (non-Newtonian varies depending on shear rate)
Shipping Specifications: 20 oz. aerosol bottle, 5 gal. Tote (19 liters) 55 gal. drum (208 liters) – 275 gal. Tote (1041 liters)
Storage Temperature: 40°F-100°F
Surface Tension: 29 dynes/cm
Storage: For long term use make sure GreenFire® Heat Barrier is properly maintained in the approved container and stored within the recommended range, there is no shelf life.
Please Note* – If freezing occurs, thawing and subsequent stirring will make the product completely serviceable.
TYPICAL PROPERTIES
GreenFire® Heat Barrier:
This product is already pre-proportioned. The end user should not be concerned with use concentration.
Specific Gravity@77F (25C): 1.02g/cc
pH @77F (25C): 6.9
Density: 8.51 lbs./gal.
Viscosity @77F (25C): 9.8cSt (non-Newtonian: varies depending on shear rate)
Shipping Specifications: 20 0z. aerosol bottle, 5 gal.Tote (19 liters) 55 gal. Drum (209 liters) 275 gal. Tote (1041 liters)
Minimum use temperature: 35°F (1.7°C)
Storage temperature: 40°F-100°F (4.5°C – 38°C)
Freezing point: 30°F (-1°C)
Appearance: Amber liquid
Copyright © 2023 Eco Fire Suppression - All Rights Reserved.
This website uses cookies.
We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.